Inch Drive - Asus E500 G5 SFF User Manual

2.7

5.25-inch drive

To install a 5.25-inch drive to the assembly module:
1. Remove the assembly module from
the chassis. Refer to 2.6.1 Removing
the assembly module for more
information.
2. Insert and carefully push the drive
into the bay until its screw holes align
with the holes on the bay.
3. Secure the 5.25-inch drive with two
(2) screws into the screw holes on
the left side of the assembly module.
4. Connect the SATA cable to the
SATA connector of the drive.
5. Connect a SATA power cable from
the power supply to the power
connector of the drive.
6. Reinstall the assembly module and
front panel cover. Refer to 2.6.2
Replacing the assembly module and
front cover for more information.
2-12
Screw holes
Chapter 2: Hardware Setup