Installing 5.25-Inch Drives Into The Drive Bay - Asus ESC500 G3 User Manual

2.6.2

Installing 5.25-inch drives into the drive bay

To install 5.25-inch drives:
1. Select the drive bay you intend to
use and remove the drive slot plate
cover.
2. Release the bay locks by pulling
them outwards.
3. Insert the drive into the 5.25-inch
drive bay and carefully push the
drive into the bay until its screw
holes align with the holes on the
bay.
4. Push in the bay locks to secure the
optical drive
5. Connect a 7-pin SATA cable (from
the motherboard SATA port) and a
15-pin power plug (from the power
supply unit) to the rear connectors
of the hard disk or optical drive.
2-18 Chapter 2: Hardware setup