Table of Contents
Advertisement
4.
Pull and swing the left edge of the
front panel cover outward.
5.
Unhook the hinge-like tabs from
the holes on the right side of the
chassis to completely detach the
front panel cover from the chassis.
Do not use too much force when
removing the front panel cover.
2.6.2
Installing an additional 5.25-inch drive
To install an additional 5.25-inch drive
1.
Select the drive bay you intend to
use. Push the knock down metal
cover in and out of the chassis until
it is removed.
Take extra care when removing
the knock down metal cover.
Use tools such as a screw driver
to bend and remove the metal
cover to avoid physical injury.
2.
Insert the drive into the 5.25-inch
drive bay.
2-16
Chapter 2: Hardware setup
Advertisement
Table of Contents
