Table of Contents
Advertisement
6.
USB 2.0 connectors (10-1 pin USB34, USB78)
The 10-1 pin connector allows you to connect a USB 2.0 module for additional USB 2.0
front or rear panel ports. These USB connectors comply with USB 2.0 specification that
supports up to 480 Mbps connection speed.
DO NOT connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
7.
Storage device activity LED connector (4-pin HDLED1)
This LED connector is for the storage add-on card cable connected to the SATA or
SAS add-on card. The read or write activities of any device connected to the SATA or
SAS add-on card causes the front panel LED to light up.
3-16
Chapter 3: Motherboard Information
Advertisement
Table of Contents
