Table of Contents
Advertisement
5.2.1
Creating a RAID set
To create a RAID set:
1.
From the utility main menu, select 1. Create RAID Volume and press <Enter>. The
following screen appears:
Enter a unique volume name that has no special characters
and is 16 characters or less.
2.
Enter a name for the RAID set and press <Enter>.
3.
When the RAID Level item is selected, press the up/down arrow key to select a RAID
level to create, and then press <Enter>.
4.
When the Disks item is selected, press <Enter> to select the hard disk drives you want
to include in the RAID set. The SELECT DISKS screen appears:
Port
Device Model
0
ST3160812AS
1
ST3160812AS
2
ST3160812AS
3
ST3160812AS
[↑↓]-Prev/Next
ASUS E500 G5 SFF
Name:
RAID Level:
Disks:
Strip
Size:aaaaaaaaaaaaaaaa
Capacity:aaaaaaaaaaaaaa
Sync:aaaaaaaaaa
Create volume
[SELECT DISKS]
Serial #
9LS0HJA4
9LS0F4HL
3LS0JYL8
9LS0BJ5H
Select 2 to 6 to use in creating the volume.
[SPACE]-SelectDisk
Volume 0
aaaaaaaaaaaaaaa
dssdsdsds
[HELP]
Size
Status
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
149.0GB
Non-RAID Disk
[ENTER]-Done
5-5
Advertisement
Table of Contents
