Asus E500 G5 SFF User Manual page 33

To install a 3.5-inch storage device to the left storage bay:
1. Remove the assembly module from
the chassis. Refer to 2.6.1 Removing
the assembly module for more
information.
2. Insert and carefully push the storage
device into the bay until its screw
holes align with the holes on the bay.
3. Secure the storage device with four
(4) screws into the screw holes
shown in the illustration.
4. Connect the SATA cable to the
SATA connector of the drive.
5. Connect a SATA power cable from
the power supply to the power
connector of the drive.
6. Reinstall the assembly module and
front panel cover. Refer to 2.6.2
Replacing the assembly module and
front cover for more information.
ASUS E500 G5 SFF
Screw holes
Screw holes
2-15