Table of Contents
Advertisement
Boot Option Priorities
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
•
To select the boot device during system startup, press <F8> when ASUS Logo
appears.
•
To access Windows OS in Safe Mode, please press <F8> after POST.
Fast Boot [Disabled]
Allows you to enable or disable boot with initialization of a minimal set of devices required to
launch active boot option. This has no effect for BBS boot options.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set Fast Boot to [Enabled].
Sata Support [All Sata Devices]
[Last Boot HDD Only] Only last booted HDD device will be available in POST.
[All Sata Devices]
VGA Support [EFI Driver]
[Auto]
[EFI Driver]
USB Support [Full Intial]
[Disabled]
[Partial Initial]
[Full Initial]
PS2 Devices Support [Enabled]
If this option is disabled, PS2 devices will be skipped.
Configuration options: [Disabled] [Enabled]
Network Stack Driver Support [Disabled]
If this option is disabled, Network Stack Driver will be skipped.
Configuration options: [Disabled] [Enabled]
Redirection Support [Disabled]
If this option is disabled, Redirection function will be disabled.
Configuration options: [Disabled] [Enabled]
The following item appears only when you set Quiet Boot to [Disabled].
POST Report [5 sec]
Allows you to set the desired POST Report waiting time from 1 to 10 seconds.
Configuration options: [1 sec] - [10 sec] [Until Press ESC]
ASUS ESC510 G4 SFF
All SATA devices will be available in OS and POST.
O nly legacy OpRom with Legacy OS, and logo will NOT be
shown during POST.
Efi driver will still be installed with EFI OS.
All USB devices will NOT be available until after OS boot.
U SB Mass Storage and specific USB port/device will NOT be
available before OS boot.
All USB devices will be available in OS and POST.
4-37
Advertisement
Table of Contents
