4.8
Monitor menu
This menu displays the system temperature, fan speed, and power status. You can also
change the fan settings in this menu.
Fan Speed Control [Generic Mode]
Allows you to select the power-on state for the NumLock.
Configuration options: [Auto Mode] [Full Speed Mode] [Manual Speed Mode]
The following items appear only when you set Fan Speed Control to [Manual Speed
Mode].
REAR_FAN1 / CPU_FAN1 / FRNT_FAN1-3 Duty% [50]
Allows you to set the desired POST Report waiting time from 1 to 10 seconds. Use the
<+> or <-> to adjust the value. The values range from 10 to 100.
4.9
Tool menu
ASUS EZ Flash
Allows you to run ASUS EZ Flash BIOS ROM Utility when you press <Enter>. Refer to the
ASUS EZ Flash Utility section for details.
4-38
Chapter 4: BIOS Setup