Table of Contents
Advertisement
5.2.1
Creating a RAID set
To create a RAID set:
1.
From the utility main menu, select 1. Create RAID Volume and press <Enter>.
2.
Key in a name for the RAID set and press <Enter>.
Intel(R) Rapid Storage Technology enterprise - SATA Option ROM - 3.6.0.1023
Copyright(C) 2003-12 Intel Corporation.
Enter a unique volume name that has no special characters and is
[
]Change
3.
Press the up/down arrow keys to select a RAID Level that you wish to create then press
<Enter>.
4.
From the Disks item field, press <Enter> to select the hard disk drives that you want to
include in the RAID set.
Port
Drive Model
0
ST3300656SS
1
ST3300656SS
2
ST3300656SS
3
ST3300656SS
[
]-Prev/Next [TAB]-(M)aster [SPACE]-(R)ecovery [ENTER]-Done
5.
Use the up/down arrow keys to move the selection bar then press <Space> to select a
disk. A small triangle before the Port number marks the selected drive. Press <Enter>
when you are done.
ASUS ESC500 G4 SFF
[
CREATE VOLUME MENU
Name:
Volume0
RAID Level:
RAID0(Strips)
Disks:
Select Disks
Strip Size:
128KB
Capacity:
0.0
GB
Syne:
N/A
Create Volume
[
HELP
16 characters or less.
[TAB]-Next
[ESC]-Previous Menu
[
SELECT DISKS
Serial #
HWAS0000991753TR
37VN00009846RAJ1
397600009846UEDY
GWC50000991756G6
Select 2 disks to create volume.
All Rights Reserved.
]
]
[ENTER]-Select
]
Size
Status
279.3GB
Non-RAID Disk
279.3GB
Non-RAID Disk
279.3GB
Non-RAID Disk
279.3GB
Non-RAID Disk
5-5
Advertisement
Table of Contents
