Advertisement
CAUTION
Do not use at the following locations.
Locations where condensation occurs
Locations where ammable gases, etc. may leak
Locations where corrosive gases, etc. may leak
Locations with lots of water or oil droplets (including machine oil)
Locations where voltage uctuation frequently occurs
Locations where there is a machine producing
electromagnetic radiation
Locations where droplets of organic solvents spread
Locations where acidic or alkaline solutions or special sprays
are frequently used
Do not operate with wet hands.
Do not wash with water.
Do not install in places shown below.
In places with sharp temperature uctuations such as near
or facing air conditioner vents or appliances that generate
intense heat.
In places e posed to direct strong light such as lightning or
headlights.
In places near incandescent lighting
In places with swaying items like curtains.
In places with light partitions or other light shaders.
Please wipe the dirt on the sensor with a dry cloth.
The motion of people on the opposite side of the glass is
usually not detected.
Appro imately 9 seconds is needed until the motion sensor is
activated after the power is on.
AMP Air Conditioning
tures.
EN 5
Installation Precautions
Dimensions
70
12
20
Installation location
Install horizontally
against the surface.
Install vertically
against the oor.
Wall
90 degrees
90 degrees
Floor
Guideline for detection area
The sensor is unable to detect the
presence of humans within about
1 m from the wall.
Appro . 1 m
Dead Zone
Appro . 6 m
Detection area
Appro . 10 m
Dead Zone
EN 6
EN
4.4
9.4
FR
5.4
12
14
SP
Install at the height of
2.5 m (within
0.25 m)
DE
above oor.
90 degrees
IT
90 degrees
Floor
PT
Detection area
GK
1 m above oor
Appro . 1 m
Appro . 6 m
www.ampair.co.uk | sales@ampair.co.uk
Advertisement
