Precautions For Installation - Panasonic WV-TW310L Installation Manual

Precautions for Installation

Panasonic assumes no responsibility for injuries or property damage resulting from fail-
ures arising out of improper installation or operation inconsistent with this documenta-
tion.
Installation place
Do not place the unit in the following places:
• Locations where a chemical agent is used
such as a swimming pool
• Locations subject to humidity, dust, steam
and oil smoke
• Locations in a specific environment where
a solvent or a flammable atmosphere
exists
• Locations where a radiation, an X-ray, a
strong radio wave or a strong magnetic
field is generated
• Locations where corrosive gas is pro-
duced, Locations where it may be dam-
aged by briny air such as seashores
• Locations where the temperature is not
within –10 °C to +50 °C {14 °F to 122 °F}.
• Locations subject to vibrations (This prod-
uct is not designed for on-vehicle use.)
IMPORTANT:
• When attaching the camera to your body,
use it environments with ambient tempera-
tures of -10 °C to +45 °C {14 °F to 113 °F}.
Note:
• Locations subject to condensation as the
result of severe changes in temperature
Shielded (STP) LAN cables must be used
with this unit to ensure compliance with
EMC standards. *
* E models only
Radio disturbance
When this product is used near TV/radio anten-
na, strong electric field or magnetic field (near a
motor, a transformer or a power line), images
may be distorted and noise sound may be pro-
duced.
12
PoE (Power over Ethernet)
Use a PoE hub/device that is compliant with
IEEE802.3af standard.
Time & date setting
It is necessary to set the time & date before
putting this product into operation. Because
the time & date of this product is set to the time
and date of the connected computer, make
sure that the time and date settings of the
computer are correct before connecting the
camera.