Samson 3730 Series Mounting And Operating Instructions page 60

Mounting and start-up
Intermediate plate for AA4 interface
Î Refer to Fig. 17
An intermediate plate (11) must be mounted
between the adapter block and adapter
bracket for PFEIFFER SRP and DAP rotary ac-
tuators in sizes 900 and 1200 with AA4 in-
terface. This plate is included in the accesso-
ries for the shaft adapter AA4 (see Table 6).
Version for single-acting actuator:
11 Intermediate plate
Fig. 17: Intermediate plate for actuators in sizes 900 and 1200 for AA4 interface
60
Mounting a solenoid valve
Î Refer to Fig. 18
A solenoid valve can also be mounted in
place of the blank plate (18). The orientation
of the turnboard (17) determines the mount-
ing position of the solenoid valve. Alterna-
tively, a restrictor plate can be mounted. Fur-
ther information can be found in the docu-
ment u AB 11 (Accessories for Solenoid
Valves).
Version for double-acting actuator:
11 11
EB 8384-6 EN