Cornelius IDC PRO 255 Operator's Manual page 26

Step
Press the brand mapping button as shown in
4
Figure 33.
Press the Brand or Flavor icon that is to be
5
remapped.
The Brand Selection screen opens as shown in
6 Figure 35. and you can select the brand to be
mapped to the valve location.
7 Repeat Steps 5 & 6 for each location desired.
When all the flavors or brands on the right are mapped, press the left button and repeat Steps 5 and 6 for the left
8 side Or, if the setup will be identical on the LH and RH side, press the copy to other side button and confirm
when prompted.
9 When all the flavors are mapped as desired, press the Save button to save the settings.
© 2016, Cornelius Inc.
Table 12.
Action
- 23 -
IDC Pro 255 Operator Manual
Brand Mapping
Flavor Mapping
Figure 33.
Figure 34.
Figure 35.
Publication Number: 621058649OPR