Step
Action
Reinstall the diffuser by pushing it
9
vertically upward by aligning the
key-slot as shown in Figure 10.
Re-install the nozzle in the unit by
rotating it in clockwise direction as
shown in the Figure 11.
10
NOTE: Do not cross thread
the nozzle.
Clean the interior of the ice chute
using the brush provided with the
11
unit. User warm soapy water,
rinse with clear water and allow to
air dry.
© 2016, Cornelius Inc.
Table 2.
Figure 10.
Figure 11.
Figure 12.
- 11 -
IDC Pro 255 Operator Manual
Publication Number: 621058649OPR