Hunter Douglas PowerView Motorization Manual page 7

IM PORTANT: The Pow erView
w indow covering until the w indow covering has been added
to a GROUP .
G e t t i n g s t a r t e d
First, activate the remote by pulling both plastic tabs from the
back battery compartment.
NOTE: If placing the remote module into a Pew ter or Clear
Frost Pebble ® , ensure the provided color insert is seated at the
bottom of the Pebble cutout.
1 0
® Remote w ill not operate a
Inserting the remote module into the PowerView
1 .
Center the Hunter Douglas logo on the remote module
above the indentation on the bottom rim of the Pebble.
2 .
Align the ribs on the remote module w ith the grooves on
the Pebble.
3 .
Gently push the remote module into the Pebble until it
is snug.
Center logo
® Pebble ® (hand-held):
Ribs on remote
to be aligned
w ith the
grooves on
the Pebble.
11