Hunter Douglas PowerView Motorization Manual page 13

R e s e t t i n g w i n d o w c o v e r i n g p r o g r a m m i n g
This reset erases Network information stored in the w indow
covering, including GROUP assignments, preventing any input
device from operating the w indow covering. Its primary use is during
installation to correct GROUP and Network assignments. This reset
does not affect travel limits.
1 .
Press and hold the manual control button for 12 seconds.
The w indow covering w ill move slightly once after 6 seconds,
then again after 12 seconds. Release the button.
2 .
Refer to " Join a w indow covering to a GROUP" on
page 19 to program the w indow covering to a group.
W h a t 's t h e D i f f e r e n c e ?
Paired rem ote
Same PowerView Shade
®
Network I.D. as original remote.
Can be programmed differently
from original remote.
Can control a different set
of w indow coverings and/or
different GROUPS.
2 2
Cloned rem ote
Same PowerView Shade
Network I.D. as original remote.
An exact duplicate of
original remote.
M ust control the same set
of w indow coverings and/or
GROUPS.
2 3