Hunter Douglas PowerView Motorization Manual page 16

R e p l a c i n g b a t t e r i e s i n t h e r e m o t e
Replacing the batteries in the remote module w ill not cause the
loss of any w indow covering programming, including GROUPS
and FAVORITE. The remote uses two CR 2032 batteries.
1 .
For the Pebble ® Remote, slide your thumb in the
indentation, gently lift and remove the remote module
from the Pebble. For the Surface Remote, remove the
Surface from its mounting plate by tw isting the Surface
counter-clockw ise. Push the remote module out from
the back of the Surface.
2 8
2 .
Rotate the back cover of the remote module
clockw ise to unlock.
3 .
Remove the back cover from the remote
module.
2 9