Hunter Douglas PowerView Motorization Manual page 14

Once the w indow coverings have been joined to a GROUP or
multiple GROUPS, the remote is ready to operate the w indow
covering(s). M ultiple w indow coverings can be operated at the
same time.
NOTE: Some PowerView
operation from the basic operation listed here. For full instructions
on how to operate your PowerView w indow treatment, please
consult the IOC that came w ith your w indow treatment.
B a s i c O p e r a t i o n
1 .
To w ake up the remote, simply pick it up or press
STOP . The last GROUP(S) selected w ill be
highlighted and active.
2 .
Press ALL or GROUP 1– 6 button(s) to select speci c
w indow covering(s) to operate. Selected GROUP button(s)
w ill light to show they are selected.
a . M ultiple GROUP buttons may be selected at the
same time.
b . To deselect a GROUP , press the GROUP button again.
The backlit GROUP button w ill go out.
3 .
Press OPEN to open the selected w indow covering(s).
4 .
Press CLOSE to close the selected w indow covering(s).
2 4
® w indow treatments offer variable
5 .
For w indow covering(s) w ith vanes or a middle rail*,
press the RIGHT ARROW to close the w indow
covering and open the vanes, rotate the vanes to
the right, or fully raise the middle rail.
6 .
For w indow covering(s) w ith vanes or a middle rail,
press the LEFT ARROW to close the vanes, rotate
the vanes to the left, or fully low er the middle rail.
a . NOTE: Single-function w indow coverings w ill not
operate by pressing the ARROW buttons.
7 .
Press STOP to stop w indow covering/vane movement
anyw here along its travel.
8 .
While a w indow covering is in motion, press the opposite
of its motion ( OPEN or CLOSE) to reverse direction.
♥
9 .
Press FAVORITE to send selected w indow covering(s)
to your preset FAVORITE position.
* Applies to Top-Dow n/Bottom-Up and Duolite ™ w indow coverings only.
The bottom rail on Top-Dow n/Bottom-Up w indow coverings operates
using the OPEN and CLOSE commands.
2 5