Hunter Douglas PowerView Motorization Manual page 12

R e m o v e a w i n d o w c o v e r i n g f r o m
a G R O U P
1 .
Press and hold
indicator lights blink. The remote is now in program mode.
2 .
Press the desired GROUP number (1– 6) on the
remote.The backlit GROUP number w ill ash to show
it is selected.
3 .
Press and hold the manual control button on the
w indow covering.
4 .
While continuing to press the manual button, press
CLOSE on the remote. The w indow covering w ill
move slightly to indicate it has been removed from
the GROUP . Release the manual control button.
5 .
Press and hold
indicator lights stop blinking to exit program mode.
2 0
STOP on the remote, until the
STOP on the remote, until the
S e t a FA V O R IT E p o s i t i o n
Each w indow covering has one FAVORITE position, w hich is
set at 50% open by default. Setting a new FAVORITE position
overw rites any previous setting.
1 .
Open or close the w indow covering to the desired position.
2 .
Press and hold STOP on the remote, until the indicator
lights blink. The remote is now in program mode.
3 .
Press and hold the manual control button on the
w indow covering.
4 .
While continuing to press the manual control button,
♥
press FAVORITE on the remote. The w indow
covering w ill move slightly to indicate it has set this
w indow covering position as your FAVORITE. Release
the manual control button.
5 .
Press and hold STOP on the remote, until the
indicator lights stop blinking to exit program mode.
2 1