Hunter Douglas PowerView Motorization Manual page 11

D e a c t i v a t i n g t h e r e m o t e 's a u t o - w a k e
f e a t u r e
The auto-wake feature activates the backlights on the remote,
w henever the remote is handled. This feature is useful for
immediately seeing w hich shade GROUP buttons were activated
last, but deactivating this feature w ill help to conserve battery
life. When the auto-wake feature is deactivated, press
wake the remote and see w hich group buttons are active.
1 .
Press and hold the GROUP 6 button on the remote for
approximately 6 seconds.
2 .
The GROUP numbers (1– 6) w ill blink once to indicate
the auto-w ake feature has been disabled.
R e a c t i v a t i n g a r e m o t e 's a u t o - w a k e
f e a t u r e
1 .
Press and hold the GROUP 6 button on the remote for
approximately 6 seconds.
2 .
The GROUP numbers (1– 6) w ill blink tw ice to indicate
the auto-w ake feature has been enabled.
1 8
STOP to
NOTE: It is recommended that only similar w indow coverings
be included in a GROUP because of differences in product
features and operation. When a w indow covering is added to
a GROUP for the rst time, it is also added to the Pow erView
Shade Network that links w indow coverings and devices together.
A GROUP can be a single w indow covering or multiple
w indow coverings. There are six unique assignable GROUPS
to use on each remote. A w indow covering may be assigned
to more than one GROUP .
J o i n a w i n d o w c o v e r i n g t o a G R O U P
1 .
Press and hold STOP on the remote, until the
indicator lights blink. The remote is now in program mode.
2 .
Press the desired GROUP number (1– 6) on the
remote. The backlit GROUP number w ill ash to show
it is selected.
3 .
Press and hold the manual control button on the
w indow covering.
4 .
While continuing to press the manual button, press
OPEN on the remote. The w indow covering w ill
move slightly to indicate it has been joined to the
GROUP . Release the manual control button.
5 .
Press and hold STOP on the remote, until the
indicator lights stop blinking to exit program mode.
®
1 9