Installing The Batteries - Renishaw RLP40 Installation Manual

RLP40 installation guide

Installing the batteries

NOTES:
See Section 5, "Maintenance" for a list of suitable
battery types.
If dead batteries are inadvertently inserted, the
3.4
LEDs will remain a constant red.
Do not allow coolant or debris to enter the battery
compartment. When inserting batteries, check that
the battery polarity is correct.
After the batteries have been inserted, the LEDs
will display the current probe settings (for details,
see Section 4, "Trigger Logic™").
1
3
2
Please remove the
battery isolation device
from the battery
compartment before use.
4