Table of Contents
Advertisement
The Web GUI
System
Power
Under normal operation conditions, this toggle is set to ON. Click this toggle to OFF, to turn the AT-OME-TX21-WP-E
"off". When "off", the PWR LED indicator will turn red. The PWOFF and PWON commands can also be used to
control the power state.
Reset to Default
Click the Factory Default button to set the AT-OME-TX21-WP-E to factory-default settings.
Firmware Update
Click the Choose File button to select the firmware file, when upgrading the firmware on the AT-OME-TX21-WP-E.
Once the firmware file is selected, click the Update button. Refer to
Updating the Firmware (page 39)
for more
information.
AT-OME-TX21-WP-E
38
Advertisement
Table of Contents
