About - Flashforge ADVENTURER 3 User Manual

<
2 / 2
Filament check: To turn on/off the filament check, notice will pop out when
filament is used up or suspended when the check is turned on.
Door open check: To turn on/off the door open check, notice will pop out when door is
open when the check is turned on.
Light: To turn on/off the light.
Light: To turn on/off the light.
Machine Type:
ADVENTURER 3
Serial No:
123456
RegisterCode:
WWNKDO
Firmware Version:
1.0.0 20170909
<
1 / 2

About:

Shows the basic information about the printer.
Notice: When contacting after-sales support, please give your Serial No to after-sales
engineer, which is showed in the [About] interface.
< <
Build Volume:
150 x 150 x 150
Usage counter:
12 hours
IP Address:
10.90.243.184: 8899
< <
<
2 / 2
<
2 / 2
26