Wall Mount A Cap L; Mounting Orientation For Wall Mounts - CommScope ION E Series Installation Manual

Installing CAP Ls

Wall Mount a CAP L

The following sections provide the installation methodology and steps required to mount a CAP L to a wall.

Mounting Orientation for Wall Mounts

When wall mounting a CAP L, the recommendations should be observed.
Wall Mount Orientation for a CAP L without a Fan Kit
•
A CAP L that does not have a Fan Kit is passively cooled. You should therefore mount a CAP L that does not
have a Fan Kit with the ANT ports pointing down (see
maximum operating temperature of 33°C (91°F).
Figure 7. Mounting Orientation for a CAP L without the Optional Fan Kit (Flat Mounting Bracket Shown)
ION®-E Series Low Power Carrier Access Point Installation Guide
Page 24
Figure
ANT connectors poin ng down
7). Otherwise, the CAP L will have a reduced
© April 2018 CommScope, Inc.
M0201AAC