Cap L Hybrid Fiber Splice Box Kit; Ac/Dc Power Supply Kit; Octis Kits - CommScope ION E Series Installation Manual

CAP L Hybrid Fiber Splice Box Kit

The CAP L Hybrid Fiber Splice Box Kit (CommScope PN 7781091-xx) separates the power from the fiber
signals on a hybrid fiber feed from the CAN/TEN. It feeds power to the CAP L through a composite cable that
includes both fiber and copper power wires. Fiber and copper terminate at the Splice Box, which allows you
to separate the DC wires and fiber at the remote end. For CAP Ls with a Fiber Interface, you will typically use
composite cable to transport signal and power, and then use the CAP L Hybrid Fiber Splice Box Kit to
terminate the fiber at the CAP L. See "Wall Mount a CAP L Using a CAP L Hybrid Fiber Splice Box Kit" on
page 28.

AC/DC Power Supply Kit

The AC/DC Power Supply Kit (CommScope PN 7775087-xx) provides a 48V External Power Supply that
converts local AC power to DC power for the CAP L. Wherever copper is already available for a CAP L
installation, a CAP L with Copper Interface should be installed. However, in a cascade, PoE is only available
for the Primary CAP L—the Secondary CAP L will require local power and the use of the AC/DC Power Supply
Kit. Moreover, the AC/DC Power Supply Kit can be used for a Fiber or Copper Interface when remote
powering is not feasible. See "Wall Mount a CAP L Using a AC/DC Power Supply Kit" on page 32.

OCTIS Kits

All CAP Ls include one OCTIS
ships with the CAP L, it will plug into the CAP L Port 1. It is the configuration of the OCTIS Kit that then makes
the AUX port compatible for a Copper Interface or a Fiber Interface.
You can order an additional OCTIS Kit, which would allow you to cascade two CAP Ls, or to attach an auxiliary
Ethernet device; which OCTIS Kit you should order is identified in Table 2.
Kit Name
Optical OCTIS Kit
Ethernet OCTIS Kit 7760652
1 OCTIS is a trademark of RADIALL.
M0201AAC
© April 2018 CommScope, Inc.
1 Kit for the primary interface to the CAN/TEN. Regardless of which OCTIS Kit
Table 2. CAP L
CommScope PN Description
7770612 Use only with CAP Ls with a Fiber Interface to cascade a Secondary
fiber unit.
Use with CAP Ls that have a Fiber or Copper Interface to cascade a
Secondary copper unit, or to attach an auxiliary Ethernet device.
OCTIS Kits
ION®-E Series Low Power Carrier Access Point Installation Guide
CAP L Overview
Page 11