Figure 4-3 Commscope Flown Mount Kit Contents - CommScope OneCell RP5000 Series Hardware Installation

Figure 4-3.
Mounting the Radio Point (RP) in the flown configuration requires the following
hardware provided by the system integrator:
•
•
•
•
®
OneCell Installation, RP5000 series, Release 4.0
CommScope flown mount kit contents
Mounting plate for
octagon box with 2
screws
Rod, 3/8-inch threaded
Nut
Lock nut, nylon
Flat washers
Chapter 4 RP5100i installation
Octagon
box
Mounting plate for RP
with 4 screws
4-23