Table of Contents
Advertisement
5 .9 Diagnosis
5 .9 .1 Envelope curve
The current measuring signal is displayed as curve.
The envelope curve is displayed, below those the measuring signal is ignored.
The valid measuring signal is marked by a vertical mark.
Downright the characteristic curve the current distance value is displayed with unit m and the
corresponding measured signal level in dB.
Cursor resp . Zoom mode
Below and left of the characteristic curve the position of a shiftable cursor is indicated.
A simple left-right-arrow-symbol allows a shift of the cursor by the keys Up resp. Down.
By simultaneous pushing of the keys Up and Down it is switched to the zoom mode for the x-axis. This
is indicated by a doubled left-right-arrow-symbol.
The zoom is referring to the current cursor position.
The display of the envelope curve is canceled by pushing the key Enter/Shift right for 3 seconds.
38
ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l info@acs-controlsystem.de
Advertisement
Table of Contents
