Graco ProMix II Operating Manual page 24

Installation ◆ Grounding
Gun Flush Box
Connect a ground wire from the Gun Flush Box ground
lug (BB) to a true earth ground. F
F . 25
IG
Flow Meters
Connect the meter cables as instructed on page 22.
Failure to properly connect the shield may cause incor-
rect signals.
Feed Pumps or Pressure Pots
Connect a ground wire and clamp from a true earth
ground to the pumps or pots. See pump or pressure pot
manual.
24
. 25.
IG
BB
Air and Fluid Hoses:
Use grounded hoses only.
Spray Gun
Follow the grounding instructions in your gun manual.
Fluid Supply Container
Follow local code.
Object Being Sprayed
Follow local code.
All Solvent Pails Used When Purging
Follow local code. Use only conductive metal pails
placed on a grounded surface. Do not place the pail on
a nonconductive surface, such as paper or cardboard,
which interrupts the grounding continuity.
Maintain Grounding Continuity When
Purging or Relieving Pressure
Hold a metal part of the gun firmly
to a grounded metal pail while
purging or relieving pressure.
Whenever you see the picture at
right, remember to follow these
instructions.
310633C