Epson TM-L60II Technical Information page 73

C O N F I D E N T I A L
Thickness:
Panel buttons:
Panel LEDs:
Interface:
Receive buffer:
Paper roll Specifications for the TM-U200
Normal paper: 0.06 mm – 0.085 mm
Pressure-sensitive paper: 0.05 mm – 0.08 mm (for one sheet)
Total thickness must be 0.2 mm or less.
FEED:
Feed paper roll (this button also can be used for the self test and the
hexadecimal dump printing).
POWER (green):
Off when the printer is turned off.
On when the printer is turned on.
PAPER OUT (red):
Off when the paper roll is adequate.
On when the paper roll is near-end or at end.
Blinks when the printer is in the self test printing standby state or in the on-
line recovery wait time state after automatic paper feed.
ERROR (red):
Off when the printer is in normal operation.
On when the printer is off-line (except during paper feed using the
FEED button and during the self test).
Blinks when an error occurs.
RS-232 (TM-U200B/TM-U200D: serial interface)
IEEE 1284 (TM-U200PB/TM-U200PD: parallel interface)
RS-485 (dealer option)
1K bytes or 40 bytes
Ver. 4.0
p. 1010