Running The Self Test With A Paper Roll - Epson TM-L60II Technical Information

C O N F I D E N T I A L
Self test for the TM-U200
SELF TEST FOR THE TM-U200
The self test lets you know if your printer is operating properly. It checks the control circuits, printer
mechanisms, print quality, ROM version, and DIP switch setting. This test is independent of any other
equipment or software.

Running the self test with a paper roll

1. Make sure the printer is turned off and the printer covers are closed properly.
2. While holding down the FEED button, turn on the printer using the power switch to begin the self test.
The self test prints the printer settings and then pauses. (The PAPER OUT light blinks.)
3. Press the FEED button to continue printing. The printer prints a pattern using the resident
characters.
4. The self test automatically ends after printing the following:
The printer is ready to receive data as soon as it completes the self test.
Paper roll Self test for the TM-U200
Self test printing.
Please press the Paper feed button.
***completed***
Ver. 4.0
p. 1015