Epson TM-L60II Technical Information page 386

C O N F I D E N T I A L
When executing this command, the paper is fed to adjust the print starting position of the
current label.
The default and adjustment amounts for the print starting position differ, depending on
the printer model. A setting exceeding the maximum adjustment amount is set to the
maximum adjustment amount.
[Model-dependent variations] TM-L60II
Program Example
PRINT #1, CHR$(&H1D);"A";CHR$(0);CHR$(18);
Ver. 4.0
Paper roll Miscellaneous commands GS A p. 1323