Epson TM-L60II Technical Information page 350

C O N F I D E N T I A L
ESC m
[Name]
Partial cut (three points left uncut)
[Format]
ASCII
Hex
Decimal
[Range]
None
[Default]
None
[Printers not featuring this command]
[Description]
Executes a partial cut of the paper roll with three points left uncut.
[Notes] GS V can also be used to cut paper. GS V is recommended for cutting paper. ESC m is not
a recommended command.
When standard mode is selected, this command is enabled only when processed at the
beginning of the line.
If an auto-cutter is not provided, this command is ignored.
When using this command, there is a gap between the auto-cutter and printing position.
[Model-dependent variations]
See program example and print sample for ESC i and ESC
Paper roll Mechanism control commands
ESC m
1B 6D
27 109
TM-T88II, TM-L60II,
None
TM-U200B/D
m.
Ver. 4.0
ESC m p. 1287