Epson TM-L60II Technical Information page 7

C O N F I D E N T I A L
System Processing Procedure
Procedure
1. Stamp printing
2. Print date and
time
3. Print Item A
4. Print Item B
5. Cut paper
Paper roll Usable application programs and tips
Commands used Description
Specifies a print position to the center by using the ESC a
ESC 3, ESC a, ESC !, command. Prints a stamp data in the center of the paper roll in
ESC U, ESC 2, LF, CR the unidirection. Adjusts line spacing for a line data being
continuous.
Specifies a print position to the left by using the ESC a
ESC a, ESC d command after printing the date and time in the center of the
paper roll.
Selects the 7 x 9 font by using the ESC ! command and prints
ESC t, ESC !, LF
the Item A.
Specifies double-height by using the ESC ! command, and
ESC !, ESC U, LF prints "TOTAL" in the unidirection. Cancels the double-height
and prints in the bidirectional mode for other lines.
GS V Feeds the paper to the cutting position and executes cutting.
Ver. 4.0
p. 944
more
more