Epson TM-L60II Technical Information page 394

C O N F I D E N T I A L
GS C ;
[Name]
Select counter mode (B)
[Format]
ASCII
Hex
Decimal 29
"0" ≤ sa ≤ "65535"
[Range]
"0" ≤ sb ≤ "65535"
"0" ≤ sn ≤ "255"
"0" ≤ sr ≤ "255"
"0" ≤ sc ≤ "65535"
[Default]
sa = "1", sb = "65535", sn = "1", sr = "1", sc = "1"
[Printers not featuring this command]
[Description]
Selects a count mode for the serial number counter by using character strings.
Count mode Conditions
Count-up
Count-down
Count-stop
• sa and sb specify the counter ranges (maximum and minimum values) for the serial
number counter.
• sn specifies the stepping amount for counting up or down.
• sr specify the repetition number of printing for the counter value.
• sc specifies the serial number counter value.
Paper roll Miscellaneous commands
GS C ; sa
1D 43 3B sa
67 59 sa
TM-T88II,
sa < sb, sn ≠ 0, and sr ≠ 0 sa
sa > sb, sn ≠ 0, and sr ≠ 0 sb
sa = sb, sn = 0, or sr = 0
; sb ; sn
3B sb 3B sn
59 sb 59 sn
TM-U200B/D, TM-U300A/B
Minimum value Maximum value

GS C ;
; sr ;
3B sr 3B
59 sr 59
sb
sa

Ver. 4.0
p. 1331
more
more
sc ;
sc 3B
sc 59