Epson TM-L60II Technical Information page 41

C O N F I D E N T I A L
Panel button:
Panel LEDs:
Interface:
Receive buffer:
Paper roll Specifications for the TM-T88II
FEED: Feed paper roll (this button also can be used for the self test, hexadecimal
dump printing, and macro printing).
POWER (green):
Off when the printer is off.
On when the printer is on.
ERROR (red):
Off when the printer is in normal operation.
On when the printer is off-line (except during paper feed using the FEED
button, self test printing, and the error state).
Blinks when an error occurs.
PAPER OUT (red):
Off when the paper roll is adequate.
On when paper roll is near-end.
Blinks when the printer is waiting for the button to be pressed.
RS-232 (TM-T88II: serial interface)
IEEE 1284 (TM-T88IIP: parallel interface)
RS-485 (dealer option)
4K or 45 bytes (selectable by DIP switch)
NV (non-volatile) bit image buffer: 256 KB
User NV (non-volatile) memory: 1 K byte
User-defined buffer (both for user-defined characters and
user-defined bit images): 12K bytes
Macro buffer: 2K bytes
Ver. 4.0
p. 978