Epson TM-L60II Technical Information page 281

C O N F I D E N T I A L
• Error status (n=3)
Bit
0
1
2
3
4
5
6
7
• If mechanical error (bit 2) or auto-cutter error (bit 3) occurs due to paper jams or the like, it
is possible to recover by correcting a cause of the error and executing DLE ENQ. But if an
error due to a circuit failure (e.g. wire break) occurs, it is impossible to recover.
• When printing is stopped during automatically recoverable error (bit 6) occurs.
• If an unrecoverable error (bit 5) occurs, turn off the power as soon as possible.
Paper roll Status commands
Off/On Hex Decimal Status
Off 00 0
On 02 2
Off 00 0
On 04 4
Off 00 0
On 08 8
On 10 16
Off 00 0
On 20 32
Off 00 0
On 40 64
Off 00 0
DLE EOT
Not used. Fixed to Off.
Not used. Fixed to On.
No mechanical error.
Mechanical error occurred.
No auto-cutter error.
Auto-cutter error occurred.
Not used. Fixed to On.
No unrecoverable error.
Unrecoverable error occurred.
No auto-recoverable error.
Auto-recoverable error occurred.
Not used. Fixed to Off.
how to use
this table
Ver. 4.0
p. 1218
more
more