Table of Contents
Advertisement
1.
PREFACE
1.1.
INTRODUCTION
Congratulations on having purchased this product. Properly installed Kemppi products should
prove to be productive machines requiring maintenance at only regular intervals. This manual
is arranged to give you a good understanding of the equipment and its safe operation. It also
contains maintenance information and technical specifications. Read this manual from front to
back before installing, operating or maintaining the equipment for the first time. For further
information on Kemppi products please contact us or your nearest Kemppi distributor.
The specifications and designs presented in this manual are subject to change without prior
notice.
In this document, for danger to life or injury the following symbol is used:
Read the warning texts carefully and follow the instructions. Please also study the Operation
safety instructions and respect them when installing, operating and servicing the machine.
1.2.
PRODUCT INTRODUCTION
MXE is a control panel which is designed for the PROMIG 501, PROMIG 511 and PROMIG
530 wire feeders. Operations of the MXE panel are versatile and very suitable for MIG/MAG
and PulsedMIG in the most demanding welding environment. MMA welding is also possible.
MXE panel is part of the KEMPPI PRO product range.
This manual describes installation, functions and use of the MXE panel. Installation and func-
tions of other units of welding set such as power source, cooling unit and wire feeder, are descri-
bed in manuals and installation instructions delivered with those units.
1.2.1. Main functions of the MXE panel
1
3
2
6
11
14
9
•
Selection of welding process: MMA (1), MIG 2T, MIG 4T (2)
•
Selection of MIG process (3): MIG/MAG, synergic MIG/MAG, synergic PulsedMIG
•
Material, gas and wire diameter selections for synergic welding (10)
•
Controls and displays of main welding parameters: wire feed speed or MMA current (4), voltage (5),
welding dynamics (8), plate thickness display (6) in synergic programs
•
Selection for controls (7): local controls, gun remote control unit, remote control unit
•
Storing of welding situations (MIG/MAG, PulsedMIG) (9): 20 channels to store welding parameters
•
Special features of MIG/MAG and PulsedMIG processes selected from panel (11): creep start, hot
start, spot weld timer, crater filling
•
Checking the shielding-gas flow
•
Using double pulse in PulsedMig welding
•
Parameter presettings of MIG/MAG, 1-MIG and PulsedMIG welding can be changed by using
SETUP function (14)
© KEMPPI OY
10
13
12
8
4
5
7
KEMPPI PRO EVOLUTION, MXE / 0547 – 3
Hide quick links:
Advertisement
Table of Contents
