Valor Portrait 530IN Installation & Owner's Manual page 41

3. Place the rear log on top of the base log locating it
into the notches on top of the base log.
4. Place the centre log on the platform inserting the
peg into the hole on the log as indicated. Line up the
log parallel to the platform.
5. Place the right log inserting the platform peg into the
hole at the end of the log; rest the upper end of the
log in the notch on the rear log as indicated.
Installation
6. Place the left log inserting the platform peg into the
hole at the end of the log; rest the upper end of the
log in the notch on the rear log as indicated.
7. Place one larger pebble on each end of the platform
to cover its edge as indicated; place the smaller
pebbles on the platform in front the larger ones as
indicated.
QUALIFIED
INSTALLER
41