Table of Contents
Advertisement
06 | Keysight | EPM and EPM-P Series Power Meters E-Series Power Sensors - Configuration Guide
Hardware Options
The following options are available on the EPM and EPM-P Series power meters. All order
combinations have to be configured upon ordering; these options are not available for field
upgrade.
EPM Series power meter
Option
Description
N1913/ 4A-004
Delete power sensor cable(s)
N1913/ 4A-101
Single/dual-channel average power meter
1
N1913/ 4A-201
Single/dual-channel average power meter with VGA, trigger in/out, one front and one
rear USB ports
N1913/ 4A-B01
Without battery (Mandatory for option 201)
N1913/ 4A-C01
Front calibrator, front sensor (Need to order option 201)
N1913/ 4A-C02
Front calibrator, parallel front and rear sensor (Need to order option 201)
N1913/ 4A-C03
Rear calibrator, parallel front and rear sensor (Need to order option 201)
N1913A-200
436A and 437B code compatibility via GPIB interface only. 436A and 437B language
modes are not compatible with LAN or USBTM remote interface. For new N1913A
purchase.
N1914A-200
438A code compatibility via GPIB interface only. 438A language mode is not
compatible with LAN or USBTM remote interface. For new N1914A purchase.
N1913/ 4A-908
Rack mount kit (one instrument). Can be ordered as standalone.
N1913/ 4A-909
Rack mount kit (two instruments). Can be ordered as standalone.
BV0007B
BenchVue Power Meter/Sensor Control and Analysis app license
N6901A-1FP
436A and 437B code compatibility for N1913A. Post purchase upgrade only.
N6902A-1FP
438A code compatibility for N1914A. Post purchase upgrade only.
1.
Option 101 provides the front calibrator and the front sensor(s), and it can't be ordered with any of the
options B0x/C0x.
EPM-P Series power meter
Option
Description
E441xA/B-002
Parallel rear panel sensor input connector(s) and front panel reference calibrator
connector
E441xA/B-003
Parallel rear panel sensor input connector(s) and rear panel reference calibrator
connector
E441xA/B-004
Delete power sensor cable(s)
E441xA/B-908
Rack mount kit (one instrument). Can be ordered as stand-alone.
E441xA/B-909
Rack mount kit (two instruments). Can be ordered as stand-alone.
Advertisement
Table of Contents
