To Configure The Compact Setup - Keysight Technologies U4301 User Manual

To configure the Compact setup

1
2
3
Keysight U4301 PCIe Gen3 Analyzer User's Guide
Click the drop-down arrow displayed with the Compact button and then select Setup Compact.
The Setup Compact Tool dialog box is displayed.
Select the packet types that you want to compact into sets.
• You can compact TS1, TS2, SKP, EIEOS, InitFC, and FTS packet types.
• For TS1 and TS2 packets, you can select whether or not only identical or all TS1 and TS2
packets should be compacted. Selecting the Only Identical checkbox compacts only identical
TS packets (that is, packets with same field values). This allows you to view when a field of a TS
packet changes compared to the previous TS packet.
• You can also choose whether or not the SKP and EIEOS packets embedded within the TS1 and
TS2 packets should be compacted with the applicable TS1/TS2 packets. If you do not select
these checkboxes, the SKP and EiEOS packets appear as individual packets after compact.
The following screen displays the above-mentioned packet options for compact.
Click OK.
The compact setup is now configured as per your selections. When you enable compact, the
packets will be compacted as per this configured setup. If the compact is already enabled, the
changed setup configuration will be automatically reflected in the compacted packets display.
Viewing PCIe Gen3 Packets
83
8