Keysight Technologies U4301 User Manual page 92

8 Viewing PCIe Gen3 Packets
To place a marker in the traffic overview chart
1
To navigate to a particular marker placed in the chart
In situations when you have placed multiple markers in the chart, you may want to navigate to a
particular marker and its associated trace position in the upper pane. To do so, right-click anywhere
in the chart, select Go To and then select the marker to which you want to navigate.
On doing so, the chart display moves to the point at which the selected marker is located. Also, the
trace position corresponding to the selected marker is highlighted in the upper pane.
NOTE
92
Double-click the location in the chart at which you want to place a marker. A new marker is
added to that chart location as a yellow vertical line and at the corresponding trace location in
the upper pane.
Alternatively, right-click the chart location where you want to place a marker. Then select Place >
New Marker or select an existing marker to place that marker at the current location.
If the markers are not displayed in the chart, click the Show Markers button at the top of the
chart pane.
Keysight U4301 PCIe Gen3 Analyzer User's Guide