3/ MOUNTING
❶ Remove the thermostat cover by pushing the pin
using a screwdriver.
❷ Attach the base by using suitable fixings for
mounting. Fit the cover back onto the thermostat.
❸ Insert the batteries, with the right polarity
1
3
2 x 1,5V - AAA LR03
8
4/ CONFIGURATION
This menu is used to determine all the settings
adapted to your installation.
❶To enter configuration mode, press the MODE
button for 10 seconds until the screen displays
CF01.
❷Press + or - to set.
❸Briefly press MODE to go to the next menu.
Press MODE or wait 5 seconds to exit.
2
CF01 - Correcting the temperature measured
Setting from -5°C to +5°C
Click
Example: If the temperature displayed by the unit is
15°C and the actual temperature (thermometer) is
16°C, set +1°C.
4
Click
EN
9