Setting The Parameters In An Ah500 Series Cpu Module; Opening The Plc Parameter Setting Window - Delta Electronics AH500 Operation Manual

Hide thumbs Also See for AH500:

Table of Contents

A H 5 0 0 O p e r a t i o n M a n u a l

8.2 Setting the Parameters in an AH500 Series CPU Module

The following software snapshots are from AH500 basic series CPU modules (AHCPU500/510/520/530).

After users double-click the CPU module in the system configuration area, the PLC Parameter Setting window

will appear. The parameters which can be set vary with the models of the CPU modules.

Before the parameters in a CPU module are set, users have to refer to the operation manual for the

CPU module. To prevent damage to the system or staff, the users have to make sure of the effect

that the parameters which are set have on the CPU module and the whole system.

The parameters are classified into several types. The users can click the primary tabs at the top of the window,

and the secondary tables at the bottom of the window to set the parameters.

Table of Contents