Delta Electronics AH500 Operation Manual page 504

A H 5 0 0 O p e r a t i o n M a n u a l
An error occurs when COM2
16#9B25 communicates with slave 5 by
Modbus.
An error occurs when COM2
16#9B26 communicates with slave 6 by
Modbus.
An error occurs when COM2
16#9B27 communicates with slave 7 by
Modbus.
An error occurs when COM2
16#9B28 communicates with slave 8 by
Modbus.
An error occurs when COM2
16#9B29 communicates with slave 9 by
Modbus.
An error occurs when COM2
16#9B2A communicates with slave 10 by
Modbus.
An error occurs when COM2
16#9B2B communicates with slave 11 by
Modbus.
An error occurs when COM2
16#9B2C communicates with slave 12 by
Modbus.
An error occurs when COM2
16#9B2D
communicates with slave 13 by
Modbus.
An error occurs when COM2
16#9B2E communicates with slave 14 by
Modbus.
An error occurs when COM2
16#9B2F communicates with slave 15 by
Modbus.
An error occurs when COM2
16#9B30 communicates with slave 16 by
Modbus.
An error occurs when COM2
16#9B31 communicates with slave 17 by
Modbus.
An error occurs when COM2
16#9B32 communicates with slave 18 by
Modbus.
An error occurs when COM2
16#9B33 communicates with slave 19 by
Modbus.
An error occurs when COM2
16#9B34 communicates with slave 20 by
Modbus.
An error occurs when COM2
16#9B35 communicates with slave 21 by
Modbus.
An error occurs when COM2
16#9B36 communicates with slave 22 by
Modbus.
1 2 - 3 8
1. Check the communication setting in the master, and
the communication setting in slave 5.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 6.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 7.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 8.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 9.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 10.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 11.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 12.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 13.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 14.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 15.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 16.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 17.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 18.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 19.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 20.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 21.
2. Check the communication cable.
1. Check the communication setting in the master, and
the communication setting in slave 22.
2. Check the communication cable.