Delta Electronics AH500 Operation Manual page 325

C h a p t e r 9 N e t w o r k C o n f i g u r a t i o n
Information window are gray. The attributes of the device can only be modified by means of HWCONFIG.
If the device selected is a DVP series PLC, a device which is added to the working area, the users can set
the attributes of the device. Please refer to section 9.1.2 for more information about the meaning of
attributes.
In the Device Information window, a port is related to a Connected Network drop-down list box. If a port
can be connected to several networks, the network numbers assigned to these networks will be on the
drop-down list which appears after the users click in the Connected Network drop-down list box
related to the port. The users can select a network number on the drop-down list. If None is selected, the
port will not connect to any network. This function is similar to the adjustment of a connection described in
section 9.2.3.
In the page for a module, the users can select a rack number in the Rack Number drop-down list box, and
a slot number in the Slot Number drop-down list box.
After the users complete the setting of the attributes of a node, and click OK in the Device Information
window, the attributes of the node will be updated immediately.
9 - 2 5