Delta Electronics AH500 Operation Manual page 242

parameters in the module replaced, the setting of the parameters in the new module will be restored to
the default values.

The Same Type checkbox is not selected.
A module selected can be replaced by any type of module. After the module is replaced, the different
input/output devices will be assigned to the new module, and the setting of the parameters in the new
module will be restored to the default values.
(5)
Click in the Replace with box, select a module in the Module Selection window, and double-click the
module. Owning to the fact that a module must be replaced by a specific module, typing a module model or
part of a module model in the Replace with box is not allowed.
*. If the Replace with box is blank, a module selected will be deleted after Replace is clicked.
8 - 1 6
C h a p t e r 8 H a r d wa r e C o n f i g u r a t i o n