Delta Electronics AH500 Operation Manual page 143

9
10
Number Name
1 Mounting hole
2 Extension port
3 Mounting hole
4 Connector
5 Connector
6 Connector
7 Hole
8 Mounting clip
9 Mounting hole
10 Locating hole

Profile of the extension backplane AHBP08E1-5A
2 4
1
2 - 11 2
C h a p t e r 2 Sp e c i f i c a t i o n s a n d S y s t e m C o n f i g u r a t i o
8
Fixing the backplane
It is connected to an inferior backplane.
After a module is installed, it is fixed by a screw.
Connecting the backplane and a power supply module
Connecting the backplane and a CPU module
Connecting the backplane and an input/output module
The projection under a module is inserted into this hole.
Hanging a backplane on a DIN rail
After a mounting clip is installed, it is fixed by screws.
A mounting clip is pressed into these locating holes.
5 6
7
3
8
Description
n
1