Summary of Contents for MadgeTech HiTemp140X2 Series
Page 1
Product User Guide HiTemp140X2 Series HiTemp140X2 Series High Temperature Dual Probe Data Logger Series To view the full MadgeTech product line, visit our website at www.madgetech.com.
RMA Instructions ..........5 General Specifications ........6 HiTemp140X2-FP Series Product Overview ........... 7 Specifications ..........8 HiTemp140X2-TD Series Product Overview ........... 9 Specifications ..........10 Troubleshooting Tips .... Back Cover To view the full MadgeTech product line, visit our website at www.madgetech.com.
RTD probe, combined with a second stainless steel bendable probe or a second flexible RTD probe. The HiTemp140X2 data logger series is compatible with the latest version of the MadgeTech Software. This allows for simple starting, stopping and downloading of collected data. Once...
Product User Guide Additional Features Submergibility The HiTemp140X2 series is rated IP68 and is fully submersible. They can be placed in environments up to 230 ft (70 m) of water. Bend Radius - The bendable probe can be bent to a 1/4 inch bend radius. The probe should not be bent within 1 inch of either weld joint.
Refer to the “Quick Start Guide” included in the package. Installing the software The Software can be downloaded from the MadgeTech website at the following link: www.madgetech.com/software-download. Follow the instructions provided in the Installation Wizard to install the MadgeTech Software.
4. Re-assemble the logger with the battery (note polarity) and endcap RMA Instructions To send a device back in to MadgeTech, follow the instructions below to create an RMA (Return Merchandise Authorization) on the MadgeTech website: 1. Visit www.madgetech.com, under the Services tab select RMA Process.
IFC400 or IFC406 USB docking station required; 125,000 baud Operating System XP SP3/Vista/Windows 7/Windows 8 Compatibility MadgeTech Software • MadgeTech Standard Software version 4.2.1.0 or later Compatibility • MadgeTech Secure Software version 4.2.0.0 or later -40 °C to +140 °C (-40 °F to +284 °F) Operating 0 %RH to 100 %RH, 0.002 PSIA to 100 PSIA...
FP probes or are available with one flexible probe and a stainless steel bendable PT probe combination. The dual probes of this HiTemp140X2 series allow for simultaneous temperature monitoring and provide flexibility in applications such as oven mapping, surface temperature monitoring, autoclave validation and sterilization processes.
Operating Enviornment 0 %RH to 100 %RH, 0.002 PSIA to 60 PSIA Questions? For troubleshooting tips and information, refer to the built in help section of the MadgeTech 4 software, visit our Knowledge Base online at www.madgetech.com/kbase or contact us for customer support at 603-456-2011.
Product User Guide HiTemp140X2-TD High Temperature Dual Probe Data Loggers with Ambient & Remote Temperature Probes The HiTemp140X2-TD data logger models feature a 2 inch rigid transitional diameter probe to measure ambient temperature, combined with a second bendable or flexible probe option.
HiTemp140X2 Series HiTemp140X2-TD Specifications • HiTemp140X2-TD-PT: Rigid RTD Probe with a Bendable RTD Probe Temperature Sensor • HiTemp140X2-TD-FP: Rigid RTD Probe with a Flexible RTD Probe • Rigid Probe: -200 °C to +260 °C (-328 °F to +500 °F) Probe Measurement •...
• Ensure that no other MadgeTech software (such as MadgeTech 2, or MadgeNET) is running in the background. • Ensure that MadgeTech 4 is being used. MadgeTech 2 and MadgeNET are not the correct software for connecting a HiTemp140X2. • Ensure that the Connected Devices panel is large enough to display devices. This can be verified by positioning the cursor on the edge of the Connected Devices panel until the resize cursor appears, then dragging the edge of the panel to resize it.