Autoclave validation data logging system (12 pages)
Summary of Contents for MadgeTech HiTemp140-FR-TSK
Page 1
Product User Guide HiTemp140-FR and HiTemp140-FR-TSK HiTemp140-FR High Temperature Data Logger with a 2 inch Fast Response Probe HiTemp140-FR-TSK High Temperature Data Logger with Thermal Shield To view the full MadgeTech product line, visit our website at www.madgetech.com.
Device Operation .............. 3 Product Maintenance ............4 RMA Instructions ............... 4 HiTemp140-FR General Specifications......5 HiTemp140-FR-TSK General Specifications ....6 Disclaimer & Terms of Use ....Back Cover To view the full MadgeTech product line, visit our website at www.madgetech.com.
-200 °C to +250 °C (-328 °F to +482 °F). The HiTemp140-FR-TSK (Thermal Shield Kit) comes with either a vented or flush top enclosure to accommodate a multitude of applications.
Product User Guide Installation Guide Installing the Interface cable - IFC400 or IFC406 Refer to the “Quick Start Guide” included in the package. Installing the software Insert the Software USB stick in an open USB port. If the autorun does not appear, locate the drive on the computer and double click on Autorun.exe.
To send the devices back, visit www.madgetech.com, select Services then RMA Process. RMA Instructions To send a device back in to MadgeTech, follow the instructions below to create an RMA (Return Merchandise Authorization) on the MadgeTech website: 1. Visit www.madgetech.com, under the Services tab select RMA Process.
MadgeTech Standard Software version 4.2.3.0 Compatibility • MadgeTech Secure Software version 4.2.2.0 or later -40 ºC to +140 ºC (-40 ºF to +284 ºF), 0 %RH to 100 %RH, 0.002 PSIA to 100 PSIA Operating Environment *BODY OF LOGGER CANNOT EXCEED 150°C...
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT SHORT CIRCUIT, CHARGE, FORCE OVER DISCHARGE, CRUSH, PENETRATE, OR INCINERATE. BATTERY MAY LEAK OR EXPLODE IF HEATED ABOVE 150 ºC (302 ºF). Specifications subject to change. See MadgeTech’s terms and conditions at www.madgetech.com...
(air, steam, oil, water, etc.) If MadgeTech is unable to definitively calculate the suitability of our product for your application, we can provide a test unit outfitted with a high temperature indicator sticker.