Page 1
Model No. WEBE11880 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or find that there are...
Important Precautions WARNING: To reduce the risk of serious injury, read the following important precautions before using the weight bench. 1. Read all instructions in this manual before using the weight bench. 2. Use the weight bench only as described in this manual.
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please note the product model number and serial number before calling. The model number is WEBE11880. The serial number can be found on a decal attached to the WEIDER ¨...
Assembly Before beginning assembly, carefully read the following information and instructions: Make Things Easier for Yourself! Everything in this manual is designed to ensure that the assembly of our products can be complet- ed successfully by anyone. However, it is impor- tant to recognize that your new equipment is a sophisticated product with many small parts and consequently, the assembly process will take...
Page 6
2. Identify the Right Base Extension (33) by looking at the indicated holes. Orient the Base Extension as shown in the drawing. Note: See the drawing on page 4 to identify the right and left side of the bench. Attach the Upright (49) and the Right Base Extension (33) to the indicated bracket on the Tower Base (57) with two 3/8Ó...
Page 7
5. Press a 1 1/2Ó x 1 1/2Ó Inner Cap (7) into the end of the Bench Frame (5). Place the bracket on the Bench Frame over the 5/16Ó x 2Ó Carriage Bolts (22) in the Stabilizer. Hand tighten two 5/16Ó Nylon Locknuts (15) onto the Bolts.
Page 8
7. Attach the Seat (9) to the indicated bracket on the Bench Frame (5) with two 1/4Ó x 1/2Ó Screws (3). 8. Press a 1 1/2Ó x 1 1/2Ó Inner Cap (7) into each end of the Leg Lever (14). Slide the Weight Tube (17) into the Leg Lever (14) and secure it with a 5/16Ó...
11. Wrap the Cable (40) around a Pulley (42) in the direc- tion shown. Attach the Pulley to the Lat Upright (34) with a 3/8Ó x 4 1/2Ó Pulley Bolt (44), a 3/8Ó Washer (31), a Pulley Spacer (48) and a 3/8Ó Jamnut (11). Note: Make sure the Cable is between the Pulley and the welded pin on the Lat Upright.
ATTACHING WEIGHTS TO THE LEG LEVER To use the Leg Lever (14), slide the desired weights (not included) onto the Weight Tube (17). Make sure the Weight Stop (55) is mounted on the Weight Tube. WARNING: Do not place more than 50 pounds on the leg lever for normal use.
the most. To give balance and variety to your work- outs, vary the exercises from session to session. Schedule your workouts for the time of day when your energy level is the highest. Each workout should be followed by at least one day of rest. Once you find the schedule that is right for you, stick with it.
Page 12
Part Identification Chart - Model No. WEBE11880 R0699A 3/8" x 4 1/2" Pulley Bolt (44) 1/4 x 1/2Ó Screw (3) 3/8" x 3 1/4" Bolt (32) 5/16" Nylon Locknut (15) Bench Rod Bolt (41) 3/8" x 2 1/4" Bolt (10) 3/8"...
Page 13
Part List - Model No. WEBE11880 Key No. Qty. Description Backrest Backrest Bracket 1/4Ó x 1/2Ó Screw Bench Spacer Bench Frame Bench Frame Bushing 1 1/2Ó x 1 1/2Ó Inner Cap Bench Rod Seat 3/8Ó x 2 1/4Ó Bolt 3/8Ó Jamnut 3/4Ó...
This warranty gives you specific legal rights. You may also have other rights which vary from state to state. ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813 WEIDER is a registered trademark of ICON Health & Fitness, Inc. Part No. 153351 J00206-C R0699A...